Showing posts with label Scenery. Show all posts
Showing posts with label Scenery. Show all posts

Friday, 22 February 2013

My First Building by Cpl Corben

Hi, it's Corben again.

I built a building with my dad today. My dad told me to clip out the pieces to make the building. I had to put the flat edge of the clippers against the model because if I didn't, it would go all wonky.


I glued the pieces together.


I glued the rest of the pieces to make the wall. My dad helped by holding it still.


There were lots of pieces.


I used special broken windows for the end of the wall.


I put glue all away along the top edge of the window pieces for the second floor.


Then I glued the second floor on.


Next I glued the side piece of the wall.


Next we took a picture of the ground floor and this is it.


I glued on the buttresses and the wall on the second floor.


This is a picture of me and my sister Willow and my building.


Now I will have to paint up the building.

Cpl Corben

(Had a cracking afternoon making this with little man, he's really getting the hang of putting these models together! - Col)

Wednesday, 16 November 2011

Scenery Tutorial - Making Tents


Tents are probably one of the most overlooked piece of scenery on the gaming tabletop. To be honest, I don't think I've ever seen one on a 40K table and yet the look great, especially when you combine them with a guard army.

I decided when I made the treatment tent for my Field Ambulance unit that I'd take pics as I built it so I could do this tutorial. I should say that this was my first time working large scale canvas/babywipes, so there was a fair bit learning in it for me. I hope you learn as much as from this project as I did. 

I should say from the start that this isn't a quick project, there's a lot of drying stages in it so it's best to treat it as a side project while you do other things. First off, there's a few materials that you're going to need ...


Here's a list ....
  • Plasticard (or other suitable basing material)
  • Polystyrene foam
  • Babywipes
  • Old sprues
  • Milliput
  • Gravel

First off, start by drawing up a template on some stiff cardboard, I went for a ridge tent style as they were the one's we used when I was a medic in the army, as you can see, the design is pretty simple ....


Once you've got you template done, it's a good idea to measure it up against some models to make sure you've got the proportions right. I went for 2.5 inches tall, 4 inches wide at the base and 3 inches wide at the base of the roof to give it slightly slopping sides ....


If I was going for true scale, then it'd be a lot bigger but then in 40K, it'd end up being bigger than a building, so I settled for a size that looked big enough to get Doc Butcher and his victim ... soz patient in it. You'll also notice in the pic that I glue two pieces of foam together because the template was just slightly taller than one single piece.

Once you're happy with your template, it's time to carve the basic tent shape out of the foam. I first used a hot wire cutter to get the rough shape before using sandpaper to smooth it all off ...


You'll notice that I've also cut a grove into the front of the tent, this is so that there will be a bit of space behind the entrance to the tent. Once the block is done, it's a good idea to mark out the base. I've used plasticard for my base but you could use MDF if you want, just keep away from cardboard as it tends to warp.


For my base, I made sure there was half an inch all round the tent with a bit more at the front as I was planning to add some bits at the front of the tent to make it look a like more interesting. After you've sorted the base, it's time to start cutting up your sprues ...


Just simply cut off the straight bits off your old sprue's (you do save them don't you?) and then clip off and file down all the little side bits that the actual models were fixed to. After you've cleaned up your sprues, it's time to start gluing them to your foam block with pva. The sprue pieces will give the impression that it's a frame once you put your baby wipes on it, so simply lay them out like you would with poles of a frame tent ...


I started with the three main longitudinal poles before adding the cross pieces to the roof. It's a bit of fiddly job but it's not hard. I highly recommend waiting for the glue on the first three pieces to dry before adding in the the cross pieces ...


While you wait for the cross pieces to dry, glue the foam to your base as you'll need it fixed to the base before you do the side pieces ...


Once it's dry, it's time to add the side pieces, don't worry about getting everything perfectly matched up with no gaps, they're going to be covered by the baby wipes anyway...


At this point, it's a good idea to give the grove at the entrance a coating of pva. This is because it's going to be the only bit of the foam that going to be exposed and so you need to protected for when you prime the model. After you've added the side pieces and coated the entrance, leave it overnight to completely dry.

Once it's dried, it's time to add a bit of contouring to the base. I used milliput sculpting putty for this as it's easy to work with and readily available from most good hobby shops. One of the benefits of using milliput is that it bonds to the plasticard really well, pva doesn't stick that well, so the milliput provides the extra bonding to hold the foam base block to the plasticard base. You'll notice that while it was wet, I've pushed in one of the gw barrels and one of their crates. This was to make sure that they sat straight on the base when they were added rather than sitting off level because of the contoured base.


Once the milliput has dried, give the base a good coating of pva, add any big bits you want to decorate the base with and then give it a good covering of gravel. I've got mine sitting on four paint pots on top of a piece of paper. The paint pots lift the base off the surface to make sure the pva doesn't make it stick to the work top (the wife would not be happy with that!) and the piece of paper is there to catch any gravel overspill so I can put it easily back in the tub.


Once again, leave it overnight to completely dry, then shake off any remaining excess and then remove any gravel that's become stuck under the base because of the pva running while it dried. you should be left with something like this ....


The next stage is to paint the entrance black before adding the sheets. Trust me, it's a nightmare to do it after you've added the babywipes, so do it now.


Now that all the basic structural work has been done, it's time to work on the canvas. I highly recommend using babywipes for this. They're cheap, available from virtually every normal shop and more like material than paper towels which means they don't tear like paper towels do. Just make sure you buy the ones without little teddy bears embossed on them. I recommend you go with ASDA Little Angels Extra Care wipes, but if you can't find them, most decent brands will do.

Take your babywipes and dry them out on a radiator. Once dry, use a ruler, a scalpel and your cardboard template to cut out the front and back pieces first. Scalpels with curved blades work best when it comes to cutting babywipes as the normal pointed ones tend to snag the wipes as you cut them. Make sure with the back and the front pieces, you leave a good 7-10mm around the edges to allow it to overlap around the poles and put a slit two thirds down the front of one of the pieces.

Then it's time to cut the main sheet that will cover the top and the sides. It's really important that you get the measuring right on this one, so measure, re-measure and dry fit. If it's too small, it's useless, if it's too large, it'll just look wrong, so take you're time and get it right, the whole model hinges on it being measured right.  


The first pieces to attach are the front and the back pieces. Run a thin thread of pva along the front and back sprues and then attach the babywipe pieces. The important thing is to make sure that you get the bottom level with the ground, once you've got it lined up, leave it to dry.


Once the pieces are fixed in place, mix up some watered down pva, go for a 50/50 mix and then give the pieces a good coating. Use your brush to tuck the overlapping bits around the sprue pieces and straighten up the front entrance flaps. Don't worry if it doesn't completely stick down, it stays wet for quite a while, so there's time to add spots of pva with a brush to bits that aren't sticking down at the edges.

Also, don't worry about any of the watered down pva getting on the gravel, we're going to seal it with watered down pva later anyway. Once again, I've got the model resting on paint pots on a cardboard box, so that any off run doesn't cause the base to stick to the work surface.


Once it' dried a bit, it's time to attached the roof and the sides. Now is the moment of truth where you find out if your measuring was right. Run some pva glue along the remaining exposed sprues and then drape the main piece over your model and leave it to dry. 


Once the main piece is fixed to the model, give it a good soaking of watered down pva. At the same time, cover all the gravel with watered down pva as well. This is to fix it firmly to the base so it doesn't come off when you're painting the model.


Leave it overnight to dry and then you can start to add the details. I added various windows and flaps made out of bits of babywipes. These were just cut out with a scalpel, dipped in watered down pva and then placed on the model. I also dremmelled out the top of the barrel, filled it with more pva soaked babywipe off cuts as a rag bin and then added a few IG bits just to finish it off. It's down to you how detailed you want to make it.


Leaving it a good day to dry completely, then it's time to prime it up .....



Then you're ready to paint it up, I followed my standard vehicle colour scheme with codex grey and shadow grey banding. The base was done with a base coat of graveyard earth and dry brush of bleached bone. The whole thing was then given a good coating of devlan mud and then it was good to go ...


I hope you liked the tutorial, if you have any questions, just ask in the comments.

Col

PS - It's actually been a few days since I finished this project. With hindsight, I should have positioned the sprue poles so the babywipe hung down and the front and the back. The sides and roof hung off the poles and look really natural. The side were actually stuck flat against the foam and came out flat and speckled with bumps. I'd also have taken the time to do a better doorway by adding a proper roll down flat and a wider entrance.

Don't take me wrong, I love this model but for me it's about learning how to do it better. This was my first time working with large scale canvas and I'm cuffed with the end result. Saying that, my next is going to be a lot better, I've already got it planned. So that's my next big hobby project, I'll tell you more about that in another post!

Saturday, 12 November 2011

Doc Butcher finally gets his tent!


I know that I was supposed to be working on Harker's Squad and my second Starstreak Hydra, but when a friend dropped over some high density foam, I kind of got distracted. I've been meaning to do a treatment tent for my Field Ambulance unit for over a year, so when I got the foam, I broke out the hotwire cutter and baby wipes and got stuck straight in.

Overall, I'm pretty pleased with it, there's the odd bit that could have been done better but then, I've always seen these projects as a chance to learn and I certainly learned a lot with this one. This tent completes my medical unit, so I'll get them all together and do a proper group post soon. In the meantime, here's so pics of Doc Butchers treatment tent ....





So, that's 462 Field Ambulance completed, time to crack on with Harker's squad, hopefully, there won't be any more distractions!

Col

Wednesday, 24 March 2010

Scenery tutorial - Making heavy foliage


I thought I'd share with you a tutorial that I've posted recently over on From The Warp on making heavy foliage terrain pieces.I want to make it clear that this tutorial isn't a masterclasses, more simple guide to making effective scenery both in looks and playability for the least amount of time, effort and money. If you're looking for masterclasses, then the net has plenty to offer.

Materials

Much like collecting an army, building scenery requires you to build up a set of tools and materials. Quite a lot of these things, you'll find that you already have as scenery building often requires some of the same tools and materials as building an army, some you'll find around the house like tools and scratch building materials, and some you're just going to have to buy.

Much like building an army, over time you'll build up a collection of tools and materials, so don't worry if you don't have something right now, if you're serious about building scenery, you'll get these things over time. For this project, there a few things that are essential.
  • Cake bases for the area terrain pieces.
  • Small bases for the foliage pieces
  • Modelling gravel for the bases 
  • Finally, your actual foliage. (We'll be looking at the different types of foliage you can use later in the tutorial)

Bases

First off, we're going to make up some area terrain bases. I have a ton of these as they make defining area terrain really easy. My main material I use for making these are cake bases. Yep, that's right, those silver things you see wedding cakes on. Cake bases come in many different shapes and sizes, virtually all supermarkets stock them and they're really easy to work with. They're basically a rough fibre board, so it's important you wear a mask when working with them.

First, peel off the silver foil, don't worry about the odd bit of white paper left on, but it's important to get all the silver off. If you get a stubborn bit, just use a bit of sand paper to sand it off. Once that's done, mark out your basic shape with marker pen. For this project, I'm doing two corner pieces as I have quite a few round and oval shapes already.


Next, cut your pieces out, and remember to wear that mask as this stuff produces lots of little fibres that you don't want in your lungs. I use a coping saw to cut mine but you can use a hobby saw or even a steak knife. You'll see that cake bases are really easy to work with.


Then you need to bevel the edges so they look right on the tabletop and don't end up looking like step. I actually use a steak knife to make the initial cuts and then sandpaper to smooth it down. Once you're done, it should look like the one on the right.


Next, cover the whole top of the piece with pva glue and then modelling gravel. Leave it to dry for a couple of hours and once it is, shake off the excess.


Once you're sure there's no excess gravel, coat the piece in watered down pva. I use a mix of 1 pva to 4 water, which looks a bit like milk once it's mixed. I find sitting the pieces on top of some paint pots on a piece of cardboard works well for stopping to pieces getting glued to your working surface as well as soaking up any excess watered down pva.


Leave it overnight to dry completely and once it is, paint it up. I normally paint my pieces with chaos black (best to use a spray can), then an overbrush of scorched brown, then a drybrush of graveyard earth and then a final drybrush of bleached bone.


Once you've got it painted up, flock it as you would your models making sure that you use a flock that'll match your gaming table.


That's the bases done, and as you can see, it's really easy to tell where the borders of the area terrain are.

Next up, we've actually got to do the terrain pieces to put on our area bases. I tend to make lots of little round terrain pieces that I can move about as I need to rather than one big one. I find it gives me flexibility on the tabletop and makes it easier to store them after the game. In the rest of this tutorial, I'm going to show you how I make jungle, woodland and alien pieces.

Jungle

There's nothing more evocative than the image of soldiers moving through thick jungle, much like the photo at the start of this tutorial. You don't really see much jungle terrain on the tabletop which is a shame as it's really easy to put together.

First off, start with some 60mm flat bases, or any sort of base really, I've used large flying bases and even cut my own out of plasticard in the past. Avoid cardboard at all costs as it's prone to warping. In this example, I've added some milliput so that my bases don't look flat but this isn't essential.


Next gravel and seal them in exactly the same way as the area terrain pieces and leave them to dry overnight.


Once they're completely dry, paint them up in the same way as well.


Then, brush glue around the edges of the bases and then cover them in static grass. Make sure you put something underneath them to catch the overspill so you can put it back into the tub once they're dry.


When they've completely dried, you'll be left with something like these.


Next up, you're going to need some jungle plants. You can buy these from GW but I highly suggest you head down to your local pet shop. Pet shops stock all sorts of handy stuff for hobbyists, from various types of gravel to plastic plants, which is what we need for this project. These are a few packets of plastic plants I picked up from my local pet shop, I got quite a lot for a lot less than the GW plants.


Get your plastic plants and then cut them up into individual plants.


Then, simply glue the individual plastic plants onto your bases and leave them to dry. Once dry, you'll have something like this.


Once you've got your area terrain pieces and foliage bases together, throw them down on the table, add some models and you're ready to go.


Woodland

By far the most common foliage feature on the tabletop is the wood, whether it's the GW plastic woods or ones made from various hobby trees, or even scratch built ones. I'll be covering how to build your own trees in the future, for this tutorial we'll look at how to base hobby trees as GW plastic ones already come with their own bases.


First off, simply glue the tree to a round base, in this case a 60mm sentinel base, using some pva glue.


Then simply cover the base in gravel and paint it up in the same way as we did the jungle bases.


Next, you're going to need some scenic material such as static grass and clump foliage. Clump foliage comes in various colours and I find a mix of colours works best.


Glue the static grass around the edges of the bases like we did with the jungle pieces. Once it's dry, add some clump foliage at the base of the trees using pva.


Once it's dry, you'll have some very simple but very effective tree bases to use to make woodland area terrain for your games. Once on the table, they'll give you a great looking woodland scene.


Alien

It's quite common to see woodlands on tabletops and even jungles but the one rarity is alien terrain which is quite strange considering 40k is a science fiction game. Making alien terrain pieces isn't that hard, you just need to find the right materials.

As a starting point, I highly recommend pot pourri, yep, that smelly stuff the women folk like to scatter around the house, it's perfect for alien terrain.


First, pick out some interesting pieces that you think would work well together. It's best to get more than you need, so you've plenty to experiment with when putting together the terrain bases.


Once you've got a good selection, dip them in your watered down pva and then leave them to dry. This will give them a protective coating, stop them smelling and help with any painting you want to do.


Once they're dry, gravel some bases as described with the jungle pieces and then glue them on.


Once they're completely dry, paint up the bases and add some static grass. You'll also find that since they were dipped in pva, you can quite easily paint the pot pourri if you like.


As you can see, even on the typical green grass tabletop, they do have a real alien feel to them.


And there you have it, a simple guide to creating heavy foliage terrain for your tabletop. I hope you've found this tutorial useful and I hope it inspires you to create some of your own.